|
|
| |
|
PUSHBUTTON
Detailed
Specifications |
| |
 |
| |
| |
| |
|
|
| |
Overall length of
assembly:
5 ft +/- 3 inches (measured from connector
tip to button cap) |
|
Connector Type:
* RCA, molded pin-plug connector |
 |
Connector & Wire*:
* 18AWG, Stranded
"zip" cord
* 300V (see AC/DC note on "switch")
* current
capacity: 3A (continuous)
Switch*:
* Normally open, momentary push-to-close
* 0.050 ohm
resistance (max, when new)
* AC specs: 3A @ 125 VAC
1.5A @ 250 VAC
(max voltage)
* DC specs: 24 VDC (max),10A (max)
<- PLEASE NOTE LOW VOLTAGE!
*-Note: Specifications
provided by switch and cord
manufacturers and have not been verified
by NED. |
| |
|
|
The complete pushbutton assembly is designed
and manufactured by
Novel Electronic Designs, Inc.
in the United States of America.
All pushbuttons are tested
prior to sale.
|
Please note: the NED
application for this device is well within the specs for the
individual components of this assembly. Activators in all NED
applications
switch small signals (less than 15mA @ 5VDC).
|
|
|
| |
|
